Do It Yourself Basement Waterproofing
Since a significant amount of homeowners who own basements are also subjected to water leaks, it’s understandable that there is such a great demand for information and products associated with do it yourself basement waterproofing.
The first thing to examine is the reason why basements are affected so much by water seepage and flooding. Serious basement problems due to excess moisture many times cause numerous problems to the basement structurally, as well as limit space, and ruin and or destroy furniture and furnishings.
Basements are basically built into a large hole that’s been dug out of the ground. After the floor and walls of the basement are finished, loose soil is used to fill in the rest of the hole. The loose soil around the basement provides the least resistance to water and it will use this path to seep into that area. The end result of this is likely to be that you will find that there is an accumulation of water either surrounding or even underlying your basement.
This creates hydrostatic pressure on the basement walls and floor. How you will do it to yourself about basement waterproofing and does it really a protect coating? No system is foolproof, because even those that remove water from the building, can’t always prevent silt and heavy rainfalls from blocking pipes and causing system overload.
It’s at this point that many people turn to do it yourself basement waterproofing rather than have the basement completely excavated and re-done, usually at great expense. Many people solve the problem by using sealants and similar products inside on the floor and walls.
A typical project might involve:
- typical projects involve removing loose material to prepare walls
- previous repair or foreign material must be removed.
- heaters and large fans can be used to ensure that your basement is as dry as it can be.
- use a primer coat on the floors and walls if the product requires this to be done.
- patch all gaps, seams, joints, or flaws that can be seen.
- the requirement at the floor/wall junction is 1″ bead of sealant.
- top-coat all surfaces with the final product, using 2 or 3 coats as appropriate.
That is about all If the product is a good one you will have a sealed basement that should last for a number of years. PermaFlex is a top sealant, and along with other complete sealants, they offer a permanent indoor basement waterproofing system. This indoor waterproofing system claims to permanently stop basement leaks and can be applied by brush, roller, or spray system.
Damp basement is a general problem of homeowners which could turn out to be very expensive if done by an outside repairer which could cost you thousands of dollars, so if you’re thinking of how to stretch your budget, you may as well do it yourself
